Motorcycle Detailing Perth is a unique cleaning type requiring special knowledge and equipment. It can be an excellent source of income for those with the right skills and tools.
Spray a clay bar lubricant on a small bike section and rub it gently to remove contaminants from the paint. Repeat the process with smaller sections.
When you start detailing a motorcycle, you must do your prep work first. This will make your job easier, faster and more enjoyable.
It’s also important to read the owner’s manual for your motorcycle to understand any special needs it may have. Then, you’ll be able to take the appropriate steps for the job at hand. For example, if the motorcycle has a windshield or saddle bags, remove them to prevent damage from water spray. It’s a good idea to remove the battery and plug or cover it, too, to prevent electrical damage.
If your motorcycle has painted surfaces, you should use a clay bar to remove contaminants that washing alone can’t get rid of. This will leave the paint smooth and free of blemishes, which will help it stay that way longer. Apply a mild detailing spray to the surface before using the clay bar and avoid circular motions, as this can re-contaminate the paint. When you’re finished, apply a cleaner and wipe down the bike with a clean microfiber towel to remove any remaining residue.
You can also use a clay bar on the chrome or stainless steel parts of your motorcycle. This step will help them look newer and brighter, and it will also protect them from corrosion.
Finally, it’s a good idea to use an engine brightener on the motorcycle’s engine. This will remove dirt and grime and restore the bike’s appearance to its original condition. You can also find products that will protect engine parts from future contaminants.
If your motorcycle has leather upholstery, it’s a good idea to vacuum it before washing it. This will remove any crumbs or debris and make the cleaning process much easier.
When you’re ready to wash the bike, be sure to use a gentle soap that’s safe for your type of leather. You should also apply a leather conditioner after you’ve cleaned it to keep the surface supple and shiny.
You can also use a steam cleaner to speed up the detailing process and to lift dirt out of crevices. It’s best to use this tool in the shade so that you don’t risk damaging your prized motorcycle. After you’ve washed the bike, it’s a good idea to rinse it with a hose to remove any excess soap and debris. Then, you can apply a wax or sealant to protect your hard work.
In addition to improving a motorcycle’s appearance, detailing can help extend its lifespan and retain resale value. It also helps the rider maintain peak performance by removing foreign particles that can cause mechanical problems. The process requires a few simple steps:
Before starting any cleaning, make sure the bike is cool and that all components are covered or plugged to prevent water from damaging them. Then find a shaded area to work and gather the necessary materials: microfiber towels, scratch-resistant mitts, hoses with spray attachments, detergents, cleaners and waxes. It is also a good idea to have a full set of motorcycle-specific tools available.
Depending on how dirty the bike is, it may require a heavy-duty degreaser. This product breaks down contaminants and makes them easier to wipe away without scrubbing. You can also use a homemade version, but remember to keep the engine and pipes cool.
The next step is to wash the bike. For this, you’ll need a high-quality microfiber or sheep skin wash mitt, soap and warm water. Rinse the mitt regularly to remove larger dirt particles and avoid scratching the paint or leather.
Next, you’ll need to clean the chrome and metal parts of the bike using a dedicated motorcycle detailing product that contains just enough abrasives to wipe away oxidation. Some of these products contain protectants that safeguard the polished metal against damage from UV rays and other environmental conditions.
If the motorcycle has any plastic components, such as a dash or plexiglass windshield, you’ll want to use a cleaner that provides UV protection and is safe for those materials. You’ll also want to use a special shampoo for the bike’s leather and vinyl components. These products often include protectants that keep the seats and other vinyl and leather elements from becoming dry, cracked or faded after prolonged exposure to the sun and weather.
After washing the bike, it’s time to clay bar. This step is vital for a motorcycle’s finish. The clay bar will remove contaminants that washing alone can’t, such as bugs, tar and road grime. Spray the clay bar lubricant on a small section of the bike, then rub it over with a light touch, changing sections frequently to prevent the clay bar from drying out.
Unlike cars, many motorcycles have chrome parts that need to be polished to a bright shine. This is a time-consuming process that requires special care and attention. Using the right products is critical for the best results. offers motorcycle detailing that is both effective and safe for your bike. In addition, it is important to clean and protect leather or vinyl materials. This is done by using non-slick protectants that are safe for your bike’s surface.
Depending on how dirty the bike is, it may require a more heavy-duty cleaner than just soap and water. This is where a degreaser can help. This type of detailing product breaks down the contaminants on the motorcycle’s paint and makes it easier to wipe them away. Many degreasers come in a spray formula that is easy to apply. Ensure that you are following the directions for use on your specific product to avoid any damage to the paint.
If the bike isn’t particularly dirty, then a good quality microfiber towel and some polishing compound should do the trick. Start with a small amount of the polish and rub it into the painted area, rubbing in circles and taking your time. It is important to switch to a clean microfiber towel often to prevent any damage to the soft paint finish. Once you have finished polishing, it is a good idea to protect the paint with a high-quality wax.
Motorcycles also have a lot of exposed fluid hoses and control cables that need to be cleaned. Many of these are covered in a protective coating, but some need to be degreased and polished to remove any deposits or grime that may have built up. This can be done with a degreaser like Gunk or Muc-Off and a metal polish like Armor-All.
As with all detailing projects, it is important to start with a thorough inspection and make a plan of action for what needs to be done. This will include deciding how far to go with the cleaning and polishing process. In some cases, a full 3-stage decontamination and major paint correction is not needed, but in other cases this may be the only way to get the results you want.
As with any vehicle, a motorbike needs to be finished and protected. The final step in a good motorcycle detailing job is to apply a coat of high-quality wax. This will protect the paint and make future washing and detailing much easier. Adding a layer of wax will also help keep the finish shiny for longer than just a wash alone.
After the wax, it’s important to use a cleaner that is safe for the rubber and plastic components of your bike. Special wipes are available for this purpose, and it’s always a good idea to stick with organic products that don’t contain any harmful chemicals.
While the painted surfaces of a motorcycle are relatively easy to keep clean, there’s often a lot more grime hiding underneath and in small crevices. This is especially true with older bikes that have been subjected to a lot of wear and tear. Fortunately, professional-grade motorcycle degreasers can break down contaminants and make cleaning a breeze. Most of these products are available in a foam formulation and require only a quick spray down with a cloth or rag.
Bike degreasers can be used on the entire motorcycle or just specific areas that are particularly dirty. One area where they really shine is on a dirty engine, transmission and drive shaft housing. You can even use them on a chain that’s been caked up with grease and oil. Using a product like Krud Kutter Original Concentrated Degreaser or something similar can save you a lot of time and effort since they do most of the work for you.
A clay bar is another excellent addition to a motorcycle detailing kit. It’s a great way to remove contaminants that have already bonded into the paint and aren’t removed by normal washing. When using a clay bar, it’s important to follow the manufacturer’s instructions and remember that you’re dealing with a delicate surface.
A successful motorcycle detailing business requires a lot of planning and preparation. Startup costs can be low, but determining where you’ll operate, finding clients, and marketing are all big challenges. With the right tools and support, however, you can build a successful motorcycle detailing business that will make your ride look as good as it rides.